OUR SERVICES
Fast Solutions, No Errors.
PROJECT SERVICES
A project consists of envisioning the work, putting it on paper, and doing correct calculation and planning. Field experience is very important in this process. Our company, which has more than 30 years of experience in contracting activities, has managed to transfer its knowledge and expertise to our projects. We take great pride in providing our customers with precise and error-free projects using licensed CAD programs.
Natural Gas Infrastructure
Through the years of activity in the Natural Gas industry, our company has gained the ability to engineer and manufacture many complex projects while offering various different services within the projects it takes on. Some of these services consist of:
• Feasibility studies
• Fault diagnosis and corrosion mitigation
• Automatic meter reading systems
• Hot tap operation
• Construction of steel and polyethylene pipelines
• Design and implementation of city Natural Gas grids
• Design and project planning of A, B, and C type pressure regulating and metering stations
Programs We Use
Since the day it was founded, our company has aimed to reduce human error to zero and provide the most efficient work in the shortest time in the projects and R&D studies we carry out by using AutoCAD for mechanical installation projects, GasWorks for Natural Gas networks, SolidWorks for Manufacturing, and Ansys for simulations.
CONSULTANCY & SUPERVISION SERVICES
We provide supervision and consultancy services at all stages of the manufacturing and installation of all kinds of Natural Gas underground and aboveground facilities with our expert staff, by complying 100% with the specifications within the threshold of the country, sector and standards used.
We also provide consultancy services to organized industrial zones and manufacturers within them for energy efficiency and operation with the bare minimum of losses.
MANUFACTURING
PRESSURE REGULATING & METERING STATIONS
TEKGAZ manufactures MS-A, MS-B, MS-C, RMS-A, RMS-B, RMS-C, RS-A, RS-B, RS-C & Second Stage Pressure Reducing Stations in accordance to the customer's needs. Engineered to the highest degree of precision and safety, our products are manufactured using the latest technology and highest quality material, and are built to last for a very long time.
COGENERATION AND TRIGENERATION SYSTEMS
Cogeneration and tri-generation are advanced energy generation technologies that maximize the efficiency of energy production by utilizing waste heat. Cogeneration, also known as Combined Heat and Power (CHP), is a process where a single fuel source, such as Natural Gas, is used to simultaneously generate electricity and useful heat, while tri-generation, also known as Combined Cooling, Heat, and Power (CCHP), is an extension of cogeneration that adds a third element to the energy generation process - cooling. We have had the opportunity to manufacture a few of these systems, resulting in a huge energy save for our customers while reducing the overall carbon footprint thanks to the efficiency of these systems.
PIG RECEIVER & LAUNCHER STATIONS
PIG receiver and launchers are robotic devices placed along pipelines and used for cleaning, maintenance and control of them. These stations play an important role in removing blockages in pipelines and improving operational efficiency.
MUD HEATING TANKS
Mud heating tanks, also known as mud tanks, are large containers used in the drilling industry, particularly in oil and gas drilling operations. They are typically made of steel and are designed to hold drilling fluids, commonly referred to as "mud."
These tanks are used to store and heat drilling mud, which serves several important purposes during the drilling process such as cooling and lubrication, controlling the pressure, and removing cuttings.
ENDSYS AUTOMATIC METER READING & ENERGY INFRASTRUCTURE MANAGEMENT SYSTEM
With technology advancing, most metering devices can be read and recorded remotely and automatically. By collecting the knowledge it has acquired in the energy industry thanks to our self developed software, ENDSYS , our company has not only developed an automatic meter reading system but also ensured the control of efficiency in the energy infrastructure. With ENDSYS, it is possible to read, evaluate and record data, no matter where you are in the world.
CARTRIDGE STEEL NATURAL GAS FILTERS
Our TEKGAZ TG-A (flat) and TG-B (angular) Type Cartridge Steel Natural Gas Filters can be produced according to PN16, PN25, PN40, ANSI 150, ANSI 300, and ANSI 600 pressure classes. Our filters are TSEK certified and ASME SEC. VIII seal can be obtained upon request.
CYCLONE FILTERS
Cyclone filters are an effective piece of equipment used to direct the gas flow to separate the particles within it. These filters are widely preferred in gas purification systems due to their high efficiency and low maintenance requirements.
HEAT EXCHANGERS
Heat exchangers are equipment used for transferring heat from one fluid to another. They are basically used for increasing or decreasing the heat of a fluid. They make the heat transfer between two fluids easier, resulting in an increase in energy efficiency and control over the temperature in processes. We produce 'shell & tube' type exchangers up to ANSI 600 pressure class for heating Natural Gas in RM-A stations. ASME SEC. VIII seal can be obtained upon request.
BALANCE TANKS
Balance tanks, also known as surge tanks or compensating tanks, are reservoirs typically used in fluid systems to control pressure fluctuations and maintain a stable flow rate. They are used for pressure stabilization, flow rate regulation, preventing water hammer, and volume compensation.
CONTRACTING SERVICES
Our company carries out all field work with the expert personnel it employs. We provide regular training and health checks to our employees, and we ensure that our personnel are certified by independent auditing organizations accredited by TÜRKAK, depending on the type of contracting project we undertake. Our main goal is to employ the personnel we need in accordance with the necessary work quality standards and occupational health and safety legislation. To effectively facilitate our employees' work, we provide them with the highest quality equipment. As a result, we have received serious appreciation for the services we offer to international companies. An example of these services is the design and manufacturing of fire extinguishing systems and grids in companies of various fields.
MAINTENANCE SERVICES
We perform both regular and emergency maintenance of the filters and regulators we install on the RMS-A, RMS-B, RMS-C and Second Stage Stations we manufacture. By keeping stock of spare parts for the stations we produce, we are able to respond to customer demands immediately. In case of demand, we also provide maintenance services to stations manufactured by other companies. We also offer regular and emergency Natural Gas leak detection services for the safety of our customers, using the most cutting edge and new technology on the market.
NON DESTRUCTIVE TESTING
With our cutting edge non destructive testing (NDT) solutions, we ensure the utmost integrity of the produced infrastructure. Specializing in the inspection of pipelines, storage tanks, stations and related equipment, we employ the most modern technology and highly skilled technicians with level 1, 2, and 3 RKS certificates to detect flaws and weaknesses without compromising the structural integrity of the product.
EFFICIENCY IMPROVEMENT PROJECTS
In today's world where energy is becoming increasingly expensive and more difficult to access, reducing the amount of energy per unit product is vital. While benefits can be achieved through equipment replacement only in electrical energy, savings can be achieved through process changes or recovery in thermal energy (fossil fuels and geothermal energy).
You cannot even imagine the amount of energy you will save by examining the thermal balance within your company in detail.
Contacting us is a good start to achieve savings in your company.
R&D
With our trained personnel, our company has the ability to carry out R&D activities both in the Natural Gas industry and the fields in which our customers operate. Over the past years, these activities have resulted in products such as the screw compressor with Natural Gas engine, automatic welding machine, PTZ corrector, etc. while carrying out the design and necessary simulations of products such as a Natural Gas cyclone filter, induction bend device, and efficient products working in tandem with renewable energy sources.